师资队伍>>

姓名:敖三三

职称:讲师

职务:无

所在系所:材料加工

最高学位及获取院校:博士,天津大学

办公电话:无

传真:无

邮箱:ao33@tju.edu.cn

通信地址:天津市津南区天津大学北洋园校区材料学院31楼,291-1

办公地址:31-291-2

教育背景:

2003.9-2007.7: 河北科技大学,材料科学与工程学院,工学学士

2007.9-2009.7: 天津大学,材料科学与工程学院,工学硕士;

2009.9-2012.7: 天津大学,材料科学与工程学院,工学博士

工作经历:(注明时间段,工作单位、职位)

2012.8-2014.7: 天津大学,机械学院,博士后

2014.7-2015.7 美国南卡罗莱娜大学,机械学院,博士后

2015.12-至今:天津大学,材料科学与工程学院,讲师

研究领域:

激光焊接过程质量检测,精密特种加工

主要讲授课程:

主要学术成就、获奖及荣誉:

中国包装总公司 科学技术发明一等奖(省部级一等奖),项目名称:新型绿色环保材料泡沫铝在包装上的应用研制与开发,项目完成单位:天津大学,中国包装总公司,2014,(排名第四)

主要承担项目:格式:项目名称+项目类别+执行年限。

1、 项目名称:基于亥姆霍兹原理的激光焊小孔腔体发声基础理论研究;项目类别:国家自然科学青年基金项目;起止时间:2015/01-2017/12;

2、 项目名称:金属丝材3D制造技术的研制;项目类别:天津大学自主创新基金;起止时间:2016/01-2016/12;

3、 项目名称:激光焊小孔复杂腔体发声基础理论及关键技术研究;项目类别:中国博士后特别资助项目;起止时间:2013/09-2014/07;

4、 项目名称:三丝共熔池全位置焊充熔体金属的动力学理论研究;项目类别:中国博士后面上资助项目;起止时间:2013/08-2014/07;

5、 项目名称:航空发动机用陶瓷深小孔电化学放电加工关键技术研究;项目类别:天津大学自主创新基金;起止时间:2014.01-2014.12;

6、 项目名称:航空用钛合金的深孔/长轴类超精密电解加工技术;项目类别:天津大学自主创新基金;起止时间:2013.01-2013.12;

发表文章、专利、专著:(主要列出几项或者几篇代表作)

形状记忆合金超声波焊接方向:

[1] Wei Zhang,Sansan Ao*, Joao Pedro Oliveira, Zhi Zeng, Zhen Luo and Zhizhuang Hao, Effect of ultrasonic spot welding on the mechanical behaviour of NiTi shape memory alloys. Smart Materials and Structures. 2018.27(8):1-6 doi:10.1088/1361-665X/aacfeb.

[2] Zhang Wei, Ao Sansan*, Oliveira Joao Pedro, Zeng, Zhi,Huang, Yifei, Luo, Zhen,Microstructural Characterization and Mechanical Behavior of NiTi Shape Memory Alloys Ultrasonic Joints Using Cu Interlayer, Materials, 2018,11(10): 1830, doi:https://doi.org/10.3390/ma11101830.

[3] W. Zhang, S.S. Ao*, J.P. Oliveirab, Z. Zeng. C.J Li, Z. Luo, Effects of ultrasonic spot welding parameters on the microstructure and mechanical properties of NiTi shape memory alloys,JMSE. 2019.

[4] 张威, 敖三三*, 罗震, 郝志壮, 陈瑶, 冯梦楠, 解龑. 焊接能量对铝镍超声波焊接接头性能的影响.上海交通大学学报,2018,)

激光焊接过方向:

[1] Zhen Luo,Sansan Ao, Yuh Jin Chao, Xuetuan Cui, Yang Li, Ye Lin. Application of Pre-heating to Improve the Consistency and Quality in AA5052 Resistance Spot Welding, Journal of Materials Engineering and Performance, 2015, 24(10):3881-3891.

[2] Ao Sansan, Luo Zhen, Feng Mengnan, Yan, Fuyu. Simulation and experimental analysis of acoustic signal characteristics in laser welding, International Journal of Advanced Manufacturing Technology, 2015, 81(1-4): 277-287.

[3] 敖三三, 罗震,单平,步贤政,刘为东. Inconel 601镍基高温合金激光焊焊缝的显微组织,中国有色金属学报, 2015,08: 2099-2107. ( 2015/8/15)

[4] 黄尊月,罗震,敖三三,姚杞,赵玉津.激光光束位置对水下激光焊接熔深和微观组织的影响,上海交通大学学报, 2016, 10: 1609-1612+1617.

[5] 黄尊月,罗震,敖三三,董建涛. 焊接顺序对某飞行器叉形结构焊接变形的影响,焊接学报, 2016, 37(8): 31-34+44+130.

[6] Zhen Luo, Weidong Liu, Zhengming Wang,Sansan Ao. Monitoring of laser welding using source localization and tracking processing by microphone array, International Journal of Advanced Manufacturing Technology, 2016, 86(1-4): 21-28.

[7] 山河,罗震,张成大,敖三三,孟繁亮.激光深熔焊声源发声机理,焊接学报, 2016, 8: 26-30+130. (2016/8/25)

[8] 敖三三,罗震,黄尊月,冯梦楠.激光深熔焊过程熔池小孔发声数值计算与试验分析,焊接学报, 2016,11:93-98+133. (2016/11/25);

[9] Sansan Ao, Zhen Luo, Chunfeng Zhao, Mengnan Feng, Weidong Liu. Numerical and Experimental Study of the Acoustic Signal Generated by Vapour Flow in Laser Welding, Lasers in Engineering, 2016, 34(1-3): 145-165.

[10] Sansan Ao, Zhen Luo, Mengnan Feng, Fuyu Yan. Extraction of the Acoustic Signal from Laser Welding in a Noisy Environment with a Microphone Array, Lasers in Engineering, 2016, 33(1-3):129-148.

[11] Sansan Ao, He Shan, Xuetuan Cui, Zhen Luo, Yuh J Chao, Mingtu Ma. Effect of specimen width on the failure behavior in resistance spot weld tensile shear testing, Welding in the World, 2016, 60(6): 1095-1107. ZunYue Huang,·Zhen Luo*,SanSan Ao, YangChuan Cai, Underwater laser weld bowing distortion behavior and mechanism of thin 304 stainless steel plates. Optics& Laser Technology, 2018.106:123-135. (DOI:10.1016/j.optlastec.2018.03.025) (3区,IF=2.109,有Web of SCi检索证明))

[12] Hao, Zhizhuang,Ao, Sansan, Cai, Yangchuan, Zhang, Wei, Luo, Zhen, Formation of SUS304/Aluminum Alloys Using Wire and Arc Additive Manufacturing, METALS, 8(8): 1-12.DOI: 10.3390/met8080595. (3区,IF=1.704)

精密电解加工方向:

[1] Weidong Liu,Sansan Ao, Yang Li, Zuming Liu, Hui Zhang, Zhen Luo, Hongli Yu.Investigation on the profile of microhole generated by electrochemical micromachining using retracted tip tool, International Journal of Advanced Manufacturing Technology, 2016, 87(1-4):877-889.

[2] Weidong Liu,Sansan Ao, Yang Li, Chunfeng Zhao, Zhen Luo, Q. Li, T. Luo. Elimination of the over cut from a repaired turbine blade tip post-machined by electrochemical machining,Journal of Materials Processing Technology,2016, 231: 27-37.

[3] 刘为东,罗震,敖三三,谈辉.基于涡轮叶片修复的电解修型非加工面保护工艺,材料工程, 2016, 11: 16-21

[4] 刘为东,罗震,敖三三,李洋,刘祖明,张辉.TC4钛合金涡轮叶片修复层的电解修形技术,天津大学学报(自然科学与工程技术版), 2017, 1: 49-53.

[5] Weidong Liu,Sansan Ao, Yang Li, Zuming Liu, Hui Zhang, Sunusi Marwana Manladan, Zhen Luo*, Zhipin Wang. Effect of Anodic Behavior on Electrochemical Machining of TB6 Titanium Alloy, Electrochimica Acta,2017, 233:190-200. (2017/4/10)

[6] Hui Zhang,Sansan Ao, Weidong Liu, Zhen Luo*, Wenjie Niu, Ke Guo. Electrochemical micro-machining of high aspect ratio micro tools using quasi-solid electrolyte. International Journal of Advanced Manufacture Technology, 2017, 91(9-12):2965-2973.

[7] Weidong Liu, Zhen Luo, Tao Yuan, Yang Li, Hui Zhang,Sansan Ao*. The multi-physics analysis for a novel tool structure to improve the accuracy in electrochemical micro-machining, International Journal of Advanced Manufacture Technology,2018,94(5-8):1991-2001.

[8] Weidong Liu,Sansan Ao, Yang Li, Zuming Liu, Zhen Luo, Zhiping Wang, Renfeng Song. Modeling and fabrication of microhole by electrochemical micromachining using retracted tip tool. Precision Engineering, 2017, 50:77-84.

[9] Weidong Liu, Sansan Ao, Yang Li, Zuming Liu, Zhengming Wang, Zhen Luo*, Zhiping Wang, Renfeng Song. Jet electrochemical machining of TB6 titanium alloy. International Journal of Advanced Manufacture Technology, 2017,90(5-8):2397-2409 DOI:10.1007/s00170-016-9500-9.

[10] Chunfeng Zhao, Zhen Luo*,Sansan Ao, Mengnan Feng, Weidong Liu, Rui Zhang. A novel method to join carbon nanotube fibers with metal substrates, Carbon, 2017,125:269-279

[11] 张辉, 刘为东,敖三三,解龑,刘祖明,罗震. 基于微孔电解加工的新型阴极结构,上海交通大学学报, 2017,51(8): 1000-1005 (2017.8.28)

[12] Weidong Liu, Hui Zhang, Zhen Luo, Chunfeng Zhao, Sansan Ao*, Feng Gao, Yubo Sun. Electrochemical micromachining on titanium using the NaCl-containing ethylene glycol electrolyte, Journal of Materials Processing Technology. 2018, 255: 784-794.

[13] 敖三三*,李康柏,刘为东, 张辉, 张威, 罗震.基于非水基电解液的钛合金微细电解加工工艺优化.天津大学学报,2019,52(2): 217-223

[14] 罗震,徐剑祥,敖三三*, 刘为东,李康柏, 张威.阵列微坑的固态微细电解加工工艺试验研究.天津大学学报,2019, 52(3):236-241,

[15] Weidong Liu, Zhen Luo, Yang, Zuming Liu, Kangbai Li, Jianxiang Xu, Sansan Ao*, Investigation on parametric effects on groove profile generated on Ti1023 titanium alloy by jet electrochemical machining, The International Journal of Advanced Manufacturing Technology, 2018, 1-14.